Wire Mesh Cable Tray
Wire Mesh Cable Tray
Main products: wire mesh cable trays, cable trays, cable ducts, cable ladders, wire ducts, pillar channels and accessories.
- Advantages: Excellent anti-corrosion performance, good ventilation and heat dissipation, convenient installation and maintenance of large-diameter cables, high strength and load-bearing capacity, easy installation, and cost-effectiveness
- Product types:Steel cable trays (galvanized cable trays and hot-dip galvanized cable trays, spray painted cable trays), stainless steel cable trays, aluminum alloy cable trays, and fiberglass reinforced cable trays.
PRODUCT PARAMETER SPECIFICATION TABLE
1. Basic Parameters
| Item | Description | Common Specifications / Range |
|---|---|---|
| Material | Base material | Electro-galvanized steel wire, hot-dip galvanized steel wire, stainless steel (304 / 316), zinc-plated steel wire, epoxy powder-coated steel wire |
| Wire Diameter | Diameter of mesh wire | Ø4 mm, Ø5 mm, Ø6 mm |
| Mesh Size | Mesh opening (W × H) | 50×100 mm, 50×50 mm, 100×100 mm |
| Tray Width | Effective cable width | 50 mm, 100 mm, 150 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm |
| Tray Height | Height of tray side wall | 30 mm, 50 mm, 100 mm, 150 mm |
| Standard Length | Length per tray section | 2 m or 3 m (custom 1–3 m available) |
| Surface Finish | Corrosion protection / appearance | Electro-galvanized (EG), hot-dip galvanized (HDG), stainless steel (SS304/316), epoxy or PVC powder coating |
| Load Capacity | Allowable load for 1–2 m support span | 50–200 kg/m (depends on type and installation) |
| Support Span | Recommended support distance | 1.0 m, 1.5 m, 2.0 m |
| Electrical Continuity | Grounding / bonding | Complies with IEC 61537 electrical continuity requirements |
| Standards & Codes | Reference standards | IEC 61537, NEMA VE 1, EN 61537, CE Certification, GB/T 23606-2009 |
2.Accessories and Fittings
| Accessory | Model / Specification | Description |
|---|---|---|
| Coupler Plate | Matching tray width | Connects adjacent tray sections |
| Mounting Bracket | Wall / Ceiling / Vertical type | Tray support installation |
| Cover Plate | Metal or plastic | Dust / water / mechanical protection |
| Elbow (Bend) | 45° / 90° / Horizontal / Vertical | Direction change for cabling |
| Earthing Clip | Universal type | Electrical grounding |
| Divider Plate | Optional | Separates cable pathways |
Wire Mesh Cable Tray is a cable support system made of high-strength steel wires welded into a mesh structure, used to carry, protect, and lay weak current, power, control, data, and communication cables.
Unlike traditional enclosed trough type cable trays, grid type cable trays adopt an open structure, which has excellent ventilation and heat dissipation performance and flexible wiring capabilities.
Main Advantages of Wire Mesh Cable Trays
-
Excellent Ventilation and Heat Dissipation
-
The open mesh design allows strong air circulation, effectively reducing cable temperature and extending service life.
-
-
Flexible Cable Routing
-
Cables can exit or change direction anywhere without the need for custom bends, making it easy to adapt to complex layouts.
-
-
Lightweight and Easy Installation
-
Much lighter than traditional solid trays; easy to cut, connect, and assemble, saving both time and labor costs.
-
-
Easy Maintenance
-
The open structure allows for quick inspection, replacement, or expansion of cables during maintenance.
-
-
Clean and Aesthetic Appearance
-
Simple and tidy design, ideal for modern data centers, offices, and visible installations.
-
-
Strong Corrosion Resistance
-
Available in multiple surface finishes — electro-galvanized, hot-dip galvanized, stainless steel, or powder-coated — suitable for various environments.
-
-
Complies with International Standards
-
Designed and tested according to IEC 61537 and NEMA VE1 standards for safety and reliability.
-
WORKSHOP
QUESTIONS AND ANSWERS
1. Uneven or Unstable Installation
Problem: The cable tray is tilted or shaky, affecting appearance and safety.
Cause: Improper installation of supports or excessive spacing between hangers.
Solution:
Use a laser level before installation to ensure alignment;
Follow design drawings strictly (typical hanger spacing ≤ 2 m);
Tighten and recheck all bolts and connections after installation.
2. Problem: Poor grounding, posing electrical safety risks
Problem: The surface of the tray rusts or paint peels off over time.
Cause: Low-quality materials or damage to the anti-corrosion coating during installation.
Solution:
Use hot-dip galvanized, stainless steel, or epoxy powder-coated trays;
Repair any coating damage after welding or cutting;
Perform regular maintenance and repainting in humid environments.
3. Problem: Disorganized cable arrangement, poor heat dissipation and maintenance difficulty
Problem: Power, control, and communication cables are mixed together, causing interference and difficulty in maintenance.
Cause: Lack of cable routing planning or failure to consider electromagnetic interference.
Solution:
Arrange cables in separate layers according to function (power vs. signal);
Use dividers for separation;
Keep cables neatly aligned and clearly labeled.
5.Inadequate Fire Protection
Problem: Openings at fire-rated walls or floors allow fire spread through trays.
Cause: Neglecting fire-stopping requirements or using non-fireproof materials.
Solution:
Seal tray penetrations at fire barriers with fireproof sealing materials;
Use fire-rated trays or apply fireproof coatings;
Inspect fire seals regularly for completeness.
6. Improper Bends and Branch Connections
Problem: Misaligned bends or gaps at joints, reducing structural strength.
Cause: Use of non-standard fittings or on-site improper cutting.
Solution:
Use manufacturer-provided elbows, tees, and crosses;
Deburr and coat cut edges with anti-rust paint;
Plan the routing and bending angles before installation.
7. Overloaded Trays and Poor Heat Dissipation
Problem: Cables overheat, causing insulation aging or damage.
Cause: Overfilling trays beyond design capacity or poor ventilation.
Solution:
Keep cable filling rate ≤ 40% (maximum 50%);
Use perforated trays or add ventilation holes in high-temperature areas;
Install multiple tray layers if necessary.
8. Lack of Maintenance and Inspection
Problem: Loose bolts, deformed trays, or missing cable labels.
Cause: No established maintenance schedule after installation.
Solution:
Implement a regular inspection plan (recommended every 6 months);
Check fasteners, supports, and grounding connections;
Update cable labels and layout drawings after modifications.
SUBMIT INFORMATION FOR SUPPORT
Are you still struggling with the long customization cycle, difficult quality traceability, or inability to find cost-effective solutions that match project requirements for cable trays? Our factory can achieve rapid customization of various types of cable trays such as trough and ladder through digital twin production and full process data quality control. Regular orders can be delivered within 7 days, and special anti-corrosion and large-span models can also be accurately matched.